Jump to content

Mazda 3 ve Mazdaspeed 3 Sema Editions


Guest axela
 Paylaş

Tavsiye Edilen Mesajlar

mazda3-and-mazdaspee-5_1024x0w.jpg

Mazda came at SEMA Show with two customized models: a Mazda3 and a MazdaSpeed3. Both models are painted in a Crystal White Pearl base coat with soft gray tone graphics to mimic the new MAZDA3 World Challenge race car.

The pearl white is combined to a black paint on the grille inserts, side mirrors, fog lamp bezels, the roof panel, and the formerly chrome interior of the front lamps. Besides that the cars get tinted windows, dark red taillight lenses and 19x8-inch wheels.

The Mazda3 uses a 2.5-liter MZR engine with a Tri-Point turbo kit and a rugged cast iron turbo manifold. This way the output was raised to 250 hp. On the other hand, the Mazdaspeed3 is already using a AEM cold-air intake that is increasing the output with 20 hp.

[img width=570 height=428]http://pictures.topspeed.com/IMG/jpg/200911/mazda3-and-mazdaspee-6w.jpg[/image]

mazda3-and-mazdaspee-4_1024x0w.jpg

[img width=570 height=348]http://pictures.topspeed.com/IMG/crop/200911/mazda3-and-mazdaspee-7_1024x0w.jpg

Both cars are painted to mimic the new MAZDA3 World Challenge race car, but in a more subdued Crystal White Pearl base coat with soft gray tone graphics. The scheme is a modern twist on the famous Renown graphics used on the Mazda 787B that won Le Mans in 1991.

Exterior details, including grille inserts, side mirrors, fog lamp bezels, the roof panel, and the formerly chrome interior of the front lamps are all given a bright black paint treatment. Combined with tinted windows, and dark red taillight lenses, the dark details tighten the car visually, emphasizing the MAZDA3’s taught, muscular shape much like a tailored black suit on an athlete.

[img width=570 height=427]http://pictures.topspeed.com/IMG/crop/200911/mazda3-and-mazdaspee-9_1024x0w.jpg[/image]

mazda3-and-mazdaspee-11_1024x0w.jpg

[img width=570 height=380]http://pictures.topspeed.com/IMG/crop/200911/mazda3-and-mazdaspee-3_1024x0w.jpg

[img width=570 height=380]http://pictures.topspeed.com/IMG/crop/200911/mazda3-and-mazdaspee-8_1024x0w.jpg

The MAZDASPEED3, already capable of 155 mph, was already nearly fast enough. An AEM cold-air intake bumps output about 20 horsepower, but otherwise, the powertrain remains untouched. Suspension is again KW coil-overs, but this time with modified top mounts on the front struts to increase camber and provide additional cornering grip. Four-piston Stoptech calipers and floating two-piece rotors nearly identical to those on the World Challenge car are used, since the car’s original brakes were transplanted to the 4-Door.

Özet olarak

Sedan Mazda 3,fabrika çıkışı 2.5lt lik motora sahip üzerine turbo takılmış gücü 250hp ye yükseltmişler.Hb Mazda 3 ise zaten Mazda'nın MPS (Mazda Power Series) üyesi ve fabrika çıkışı gücü 260Hp ekstradan üzerine AEM Cold Air İntake(Hava filtresi kiti) takılarak gücü 20Hp yukarı çekilmiş.

Üzerlerinde 8x19inch ebatında Rx-8 (2009) jantları ve 225/40/19 Bridgestone Potenza lastikler mevcut.

Bu iki araç Sema Auto Show için hazırlanmış.

Yorum bağlantısı
Diğer Sitelerde Paylaş

bu görüntüleri bizde siyahla yaptık Murat'la  :)

çift egzost yakışıyor ama arabalara

ah be abi ihtiyarda olsa arka fon olarak kullanılan bir araç daha vardı sizinkinde  :D

Yorum bağlantısı
Diğer Sitelerde Paylaş

nostaljide yaptık tabi :)

ah be abi ihtiyarda olsa arka fon olarak kullanılan bir araç daha vardı sizinkinde  :D

bence TR'ye gelmez, ama dışarıdan getirtilebilir.İleride topluca belki birşeyler yaparız talep çok olursa.

Farlar çok hoş. Bizimkiler için çıkar mı acaba? Modifiye edelim.

Yorum bağlantısı
Diğer Sitelerde Paylaş

  • 2 ay sonra ...

bu jantlara hastayım. çok iyi...

araçlar cam tavan değil, folyo tavan :D

bir mazda3 bu kadar sade ve güzel olur ancak. avrupada z-line diye mazda serileri var. o aksesuarları getirtsek biraz çakma da olsa benzer heralde... :D

Yorum bağlantısı
Diğer Sitelerde Paylaş

 Paylaş

×
×
  • Yeni Oluştur...