SPS Motorsport

[Guido@SPS 51]

Dear community,

I already introduced You to our program, so I'll use this thread to keep You up to date.

 

The following weekend we are testing our racecars at Zandvoort to make them ready for the next TimeAttack season.

 

And maybe we have s special surprise on the track.

 

Greetings

Guido from SPS

[Guido@SPS 51]

We had a successful weekend on Zandvoort. 5 of our 6 cars with their drivers got on the podium. The cars worked really well and we had no big issues. The drivers are also very happy with their cars and the work of our whole team. We are looking forward to the upcoming German TimeAttack season.

Greetings
Guido from SPS

[Guido@SPS 51]

Here you can see a bit of everyday workshop life. This ND got a BBR GTi turbo kit. The car now makes 240hp. It also got 949 racing rims with semi-slicks, a big-brake-upgrade, an Öhlins suspension and an anti-rollbar from H&R. The car drives really well.

Best regards
Guido from SPS

[Guido@SPS 51]

One customer brought us his car to get a suspension adjustment with his new rims, tires and our coilover.
We like this setup. The car has a sporty look.

Setup: Enkei RPF1 8x16 with 38mm offset on Yokohama Advan AD08R 225/45 R16 and our SPS coilover for the ND

Best regards
Guido from SPS

[Guido@SPS 51]

This a good example for a really tough build! We made the car ready for Time Attack races, but the car is still allowed to drive on street.

Some specs:
1.6L forged Block with an EFR 6258 turbocharger (over 300hp)
full 3" exhaust with HJS catalytic converter
Competition Clutch Stage 3 Clutch
Megasquirt MS2 pnp
6-speed manual gearbox
Kaaz LSD
Engine-, gearbox- and differential cooling
BC Racing ER-series suspension
K-Sport 6-piston 286mm big brake upgrade
Nankang AR-1 205/50 R15
Sparco Sprint seats with Sparco 4-point harness
Full roll over protection system
Nardi steering wheel

Best regards
Guido from SPS

[Guido@SPS 51]

This time a really cool sleeper met us.

It has a Rotrex C30/94 supercharger on a 2.0l making 345hp and 360Nm of torque.
The car drives really nice because it feels like a big natural aspirated engine. High speed runs on the German Autobahn are no problem. ;)

The rest of the setup:
- Flyin Miata Header
- HJS 200 cells catalytic converter
- SPS Motorsport Catback
- Cat Cams Stage 1 camshafts
- forged pistons (compression 13:1)
- forged rods
- 750ccm injectors
- BC Racing BR-series coilover
- OZ Ultraleggera 8x17 with 40mmm offset on Yokohama AD08R 215/45 R17 tires
- K-Sport 8 piston calipers

Best regards
Guido from SPS

[Guido@SPS 51]

Today we finished a NC 1.8 with a GT2560 turbo conversion producing 230hp.

Specs:
- GT2560
- HJS catalytic converter
- Friedrich Motorsport exhaust system
- BC Racing BR-Series suspension
- Rota Titan 8x17 rims
- Yokohama Advan AD08R 215/45R17

Best regards
Guido from SPS

[Guido@SPS 51]

Here we have a really track focused NC. A 2.0L with a GT2860RS turbocharger making 270hp. The car is also very light. With 50% gas in the tank it weighs just 1122kg.

The rest of the specs:

- CSF radiator
- coilover suspension
- short differential
- brake cooling hoses
- Tarox F2000 with EBC YellowStuff
- rollover protection bar
- oilfilter relocation
- gearbox- and differential oil cooling system with external oilpump
- Rota Titan 9x17 with Nankang AR-1 255/40 ZR17

Best regards
Guido from SPS

[Guido@SPS 51]

One of my favorite cars on our site. Very clean oldschool setup.

The specs:
- 1.6L with a GT2560 turbocharger producing 230hp
- Mishimoto radiator
- oilcooling system
- BC Racing BR-series coilover suspension
- Lotus seats
- Sparco seat belts
- Momo steering wheel
- SPS Track+ roll over bar
- Rota RKR 8x15 with Nankang AR-1 205/50 R15 tires

Don't worry, we replace the sideskirts soon.

Best regards
Guido from SPS

[Guido@SPS 51]

Last weekend we had another TimeAttack run. The cars performed really well. We also had a special car there to test. A Ferrari F40 LM. We maintain the car since last year.

Best regards
Guido from SPS

[Guido@SPS 51]

Hey guys, we have new seats in our shop ND. We also found a bracket solution to mount several Recaro seats in the ND.

And finally our webshop is available in english.

Best regards
Guido from SPS

[Guido@SPS 51]

Last weekend we had another TimeAtttack run, this time at the "Reisbrennen".

We had some issues with the white NA and the green NB:
The white NA got another Turbo, a Borg Warner EFR 7670. At 1.5bar the fuel pressure got to low so we have to upgrade the fuelpump.
The green NB got problems with the ignition. We have to change the sparkplugs to a higher heat value.

But the rest of our cars performed pretty well and we saw many other MX-5 on the track. We are happy to MX-5s on the racetrack.

Some impressions:

Best regards
Guido from SPS

[Guido@SPS 51]

We had a customer here for a budget turbo conversion with a TD04 turbocharger on a 1.6L engine producing 220hp. Cool and clean looking car with some nice parts installed.

Best regards
Guido from SPS

[Guido@SPS 51]

Here we have one of our biggest customer projects this year. A MX-5 ND RF with a Rocket Bunny kit and turbo conversion. A stunning car...

- Rocket Bunny kit
- Work Rims
- Nankang AR-1
- SPS coilover customized
- BBR GTi turbo conversion
- Zymexx exhaust
- CAE shortshifter
- Recaro Pole Position seats

If You have questions about the car or something different, just ask me.

Best regards
Guido from SPS

[Guido@SPS 51]

This year the world is celebrating 30 years of Mazda MX-5. So Mazda Germany had the idea to pay tribute by braking a record.
The idea was to drive as many corners as possible in 12 hours. The perfect job for a MX-5 NA.

So Mazda Germany came to us to get a red NA 1.6L prepared for the record. The limit was the power of the engine had to be stock.

So we installed these parts:
- engine oil cooling kit
- 6 speed transmission with gearbox oil cooling kit
- miataroadster short shifter
- Torsen-LSD with differential oil cooling kit
- SPS roll bar
- Sparco steering wheel
- Sparco Sprint seats
- Schroth racing 4-point harness
- StopTech 4-piston 286mm Big Brake Kit
- BC Racing ER-series suspension
- ATS DTC 15" rims
- Mishimoto radiator
- Competition Clutch Flywheel and Stage 3 Clutch
- custom exhaust
- custom rallye headlights

Then they set the record in the austrian alps. Mazda Germany also produced a YouTube series about that record. We are very proud to be part of that whole operation.

YouTube: https://www.youtube.com/watch?v=s79TXURYu18&list=PL6F8h02rFBz-tu9sv32tw0JBUkBjkzd-n&index=5

Press: http://japanesenostalgiccar.com/mazda-mx5-miata-world-record-most-hairpin-turns-in-12-hours/

Best regards
Guido from SPS

[Guido@SPS 51]

This is the car of a good friend of our company. The look of the car is really cool, but the engine is a tough one.

A BP block, reamed to 2 liters with an individual throttle body, race header, adjustable camshaft gears, race camshafts, revving to 8600rpm producing 230hp.
The sound the engine produces, is incredible! It screams like a race car! I think the owner, Jean Claudio Flensberg, has a good taste.

Parts:
- 2.0L reamed BP block
- ARP head stud kit
- JE pistons 85.5mm
- K1 conrods
- ACL bearings
- adjustable camshaft gears
- race camshafts
- Supertech valves with Supertech valve spring kit
- Jenvey ITB
- engine oil cooling kit
- Racingbeat exhaust header
- Mishimoto radiator
- BC-Racing coilover
- Nardi deep corn steering wheel
- Recaro Profi SPG seats
- Takata harness
- SPS Extreme rollover bar
- Rota Kyuasha 8x15 0mm offset
- Nankang NS-2R 195/50R15

YouTube:
https://youtu.be/jD34UuNXKuk

https://youtu.be/NC-b44-4vQM

Instagram:
https://www.instagram.com/naughtymiata/

Best regards
Guido from SPS

[Guido@SPS 51]

This is one of the toughest conversions we ever made. A 2.5L V6 KL swap with an ITB. We had many issues with the car until it was ready to go on the street. But at the end we solved every problem and now the car runs fine. The block is bored from 2.5L to 2.6L equipped with Wiseco pistons and K1 conrods, main and conrod bearings are Toga high performance bearings. The head got solid cam followers with different camshaft and an individual throttle body. The engine produces 250hp with an airbox on the ITB and 300hp without the airbox.

Specs:
- 2.6L KL
- Wiseco pistons
- K1 conrods
- Toga high performance main and conrod bearings
- Catcams camshafts
- solid cam followers
- custom ITB
- custom airbox
- mishimoto radiator
- BC Racing BR-series coilover
- DIY microsquirt ECU
- Rota RKR 8x15" 10mm offset rims

YouTube:
https://youtu.be/0dfFEtwMids

Best regards
Guido from SPS

[Guido@SPS 51]

This is a really nice sleeper setup. A 1.8L NA with a GT3071R turbocharger producing more than 350hp.
The owner doesn't want a rollover bar because he wants to keep the sleeper look.

Specs:
- 1.8L BP bored for 84.5mm Wiseco pistons
- K1 conrods
- ACL main- and rod bearings
- Boundary stage 2 oilpump
- ARP head stud kit
- Garret GT3071R turbocharger
- ATI Superdamper
- SPS oil cooling kit
- Mishimoto radiator
- Skid Nation reroute kit
- 6-speed gearbox
- MiataRoadster short shifter
- StopTech BBK 280mm
- Rota Strike 8x15 20mm offset with Nankang AR-1
- CanChecked Display universal 2.8"

YouTube:
https://youtu.be/DX4rvrRTUKQ

Best regards
Guido from SPS

[Guido@SPS 51]

This is a supercharged NC from a good friend of the company. The car got a Rotrex C30/94 on its 2.0L installed producing 303hp and 314Nm.
Also the car got a nice look with it shiny rims and low coilover setup.

I think Kermit likes that.

YouTube:
https://youtu.be/24y9trimIPU

Instagram:
https://www.instagram.com/ndi.like

Best regards
Guido from SPS

[Guido@SPS 51]

Hey guys,

this is our second MX-5 ND. It is wrapped in british racing green and has some cool stuff installed. It is also our first car with a 200hp package with a full exhaust system including race header and software tuning.

It has also following parts installed:
- SPS circuit coilover
- StopTech 280mm 4-pistons Big Brake Kit
- Rays TE37 rims 8x16 25mm offset with Toyo R888 205/60 R16 tires
- Friedrich Motorsport exhaust system
- BBR GTi race header
- Recaro Pole Position seats
- CAE short shifter

YouTube:
https://youtu.be/pgN2g_6ycn8

Best regards
Guido from SPS